F5000 Inversion Table Upgrade F7000 Model

The F5000 is "UL listed". UL listed means it has been classified by Underwriter's Laboratories, an independent testing facility. The F5000 was tested under rigorous specification in its extreme fully inverted position. At the 6'6" and 300 lb. capacity, the load was tested with a 400% safety factor. Now That's Quality, Strength, and Safety no other table can compete against ! Since 1981, Teeter HangUps has set the standard for quality inversion products.

The weight is 65 lbs. compared to the competitors table weighing in at 44 lbs. That's a huge difference in Quality of Material used.

The balance is so good, simply lift arms over your head & back down to rotate the tables tilt. If you don't want to hang totally upside down, the tether strap stops you at any angle.

Specs
Shipping Dimensions: Shipping Weight is 70 lbs.
Shipping Dimensions: 50 x 30 x 6
Assembled dimensions: 45" x 28" x 58"
Storage dimensions: 28" W x 16" L x 66" H
Height capacity: 4’8” - 6’6". (142 - 198cm)
Weight capacity: 300 lbs. (136 kgs)

Quick and easy assembly, 95% pre-assembled with included tools for assembly. It takes about 15 minutes to assemble this model.  There are only 6 pcs of actual hardware that need to be attached to the machine.  The machine can be folded for storage in 10 seconds without any disassembling.

Inversion is a natural form of traction that uses your own body weight and gravity to decompress weight-bearing joints. While the body is rotated and suspended, gravity’s force applies traction, resulting in a customized stretch that elongates the spine, increasing the space between the vertebrae, which relieves the pressure on discs and nerve roots. Less pressure means less back pain. Inversion may be best known as a method to relieve back pain, but it’s also an effective way to stretch and relax muscles, reduce stress and tension and provide healthy movement for ligaments.

The F5000 inversion table comes complete with everything you need for inversion. Some also buy our "Adapter Kit" ( gravity boots and CV bar) to convert the F5000 inversion table to gravity boot use.

We suggest buying the F5000 table only. Later on, if you want to enhance your hanging comfort, purchase the "Adapter Kit". The adapter kit includes the gravity boot and the CV bar necessary to convert the F5000 to gravity boot use. The CV bar replaces the standard foam ankle clamp assembly on the F5000. The gravity boots hang from the CV bar.

Some customers prefer using the Gravity Boots with the table, because they planned on doing a lot of inverted sit-ups. A few customers use gravity boots with the F7000 inversion table because they feel it inhances their hanging comfort and feels better on their ankles.

We use Teeter Hang Ups inversion table here daily and feel the table is GREAT just the way it is ... but we don't do inverted sit-ups. Because you simply step onto the tables platform and invert quickly. With gravity boots, you need to take off your shoes and put on the boots each time you want to invert and everyone else must use gravity boots too, unless you return the table back to the standard setup with the foam ankle clamp assembly.

The "Adapter Kit" ( gravity boots and CV bar) can be found on our gravity boots page.

The decision is yours.

We've never had very few F5000 inversion table returned, but we gladly accept returns within 30 days of delivery. Simply call us for a return authorization number and return in original packaging. You are responsible for shipping.

Disclaimer: As with any fitness program, people should consult with their medical advisor before beginning inversion therapy. In general, contra indications for inversion are for health problems related to eye pressure, heart or circulatory problems, spinal injury, or bone weaknesses or fractures.